大容量储能发电机并联运行励磁控制算法

大容量储能发电机作为脉冲电源，整流后通过逆变器向大功率脉冲负载供电。采用储能发电机直流侧并联方式工作，可以有效提高系统带载能力与可靠性。当并联运行的储能发电机转速不同时，根据转速合理分配电机释放功率可以有效提高系统工作效能，因此需要设计一种具有功率调节功能的励磁控制算法。在电压、电流双闭环控制的基础上，引入功率前馈控制，推导并求解了前馈功率与励磁电流关系以及控制参数，并根据电机初始转速设计了功率分配算法。仿真试验结果表明，功率前馈控制在励磁控制过程中起主导作用，有效分配储能电机释放功率大小，提高了励磁电流响应速度，抑制了负载功率扰动对励磁控制系统的影响。     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统，将改进的Euler方法应用于非线性方程求根问题，给出非线性方程求根的预估-再校正迭代格式，证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验，数值结果验证了算法的有效性。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

考虑扩散效应圆形隧洞热弹性耦合动力响应研究

利用S-H热弹性扩散的基本理论,研究了无限弹性介质中圆形隧洞表面受随时间变化的热冲击的动力响应问题.采用直接求解方法以避免势函数的引入,利用Laplace变换技术,求解热、力、化学耦合控制方程,获得了弹性介质中温度梯度、位移、应力和化学势的积分形式解.最后,利用Laplace逆变换得到数值结果,分析了热、力、化学耦合条件下弹性介质中温度梯度、应力、位移和化学势响应的分布规律.     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

基于ADAMS和Matlab的大口径舰炮发射系统动力学仿真

利用ADAMS和Matlab/Simulink两大软件的信息交互功能,将ADAMS中的全炮动力学仿真模型生成ADAMS_SUB模块,并将其嵌入联合后坐系统仿真模型中;通过ADAMS和 Matlab/Simulink同步运行对全炮进行发射动力学联合仿真,模拟大口径舰炮发射的全过程,分析全炮的动态响应.对全炮发射动力学联合仿真结果进行后处理分析,观察炮口扰动曲线,进行稳定性分析和炮口扰动分析.根据分析结果,对所建模型及仿真模块进行评价,结果表明,仿真结果与靶场试验数据基本吻合,为物理样机的研制提供了重要的理论参考依据.     

挠性接管在轴对称载荷下的应力应变计算

针对目前挠性接管强度计算存在的不足,在充分考虑骨架层的弯曲刚度和扭转刚度对挠性接管强度影响的基础上,推导出在承受轴对称负荷(拉压、扭矩及内压)时,挠性接管及其加强筋的应变和外力的关系,为挠性接管的结构设计和强度计算提供了理论公式.     

Dynamic inventory management with cash flow constraints

In this article, we consider a classic dynamic inventory control problem of a self‐financing retailer who periodically replenishes its stock from a supplier and sells it to the market. The replenishment decisions of the retailer are constrained by cash flow, which is updated periodically following purchasing and sales in each period. Excess demand in each period is lost when insufficient inventory is in stock. The retailer's objective is to maximize its expected terminal wealth at the end of the planning horizon. We characterize the optimal inventory control policy and present a simple algorithm for computing the optimal policies for each period. Conditions are identified under which the optimal control policies are identical across periods. We also present comparative statics results on the optimal control policy. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2008     

硅整流无刷发电机供电系统动态性能的研究

分析了坦克的供电系统中采用硅整流无刷发电机时的工作特点,建立了这种系统的数学模型,举例说明了计算方法,并在文章的最后进行了评价.     

空间信息栅格体系与服务聚合技术

空间信息应用中存在的数据海量、分布异构、处理复杂、计算密集等问题制约了空间数据和信息的广泛共享和应用。空间信息栅格(SIG)以Grid和WebServices技术为核心,共享并汇集地理上分布的海量空间信息资源,实现动态整合与集成。在构建开放性SIG七层应用体系的基础上,重点研究SIG服务聚合技术,基于Petri网和图论提出了一种新的服务聚合流程模型(服务/资源网),同时构建了可扩展的服务动态选择模型(SISM),实现服务聚合过程中的动态服务选择。结合国家地质调查业务应用,通过地下水资源评价应用实例对SIG的实用性和有效性进行了验证。